This program is designed to provide the user with information related to the Minimum Off-Route Altitude (MORA) for a given position represented in latitude and longitude.
The modes available are:
Edit*
Video
Screen
Hardcopy
Quit
*This mode is not available to all customers. For more information regarding this mode, please submit a ticket in the N-Flight Planning Support Portal.
Edit Mode
Field | Description |
Latitude Range - From | Enter the beginning latitude of the range of latitudes that you want to include in the report. |
Latitude Range - To | Enter the ending latitude of the range of latitudes that you want to include in the report. |
Latitude | Enter the latitude of the position for which the MORA value is being requested. Example: For a latitude of 54N the correct entry would be 54; to enter 54S the correct entry would be -54. |
Longitude | Enter the longitude of the position for which the MORA value is being requested. Example: For a longitude of 108W, the correct entry would be 108; to enter 108E the correct entry would be -108. |
Altitude | The MORA value for the position will appear in this field and will be shown in hundreds of feet. Users with edit access can then modify the value as required. |
Video Mode
Field | Description |
Latitude | Enter the latitude of the position for which the MORA value is being requested. Example: For a latitude of 54N the correct entry would be 54; to enter 54S the correct entry would be -54. |
Longitude | Enter the longitude of the position for which the MORA value is being requested. Example: For a longitude of 108W, the correct entry would be 108; to enter 108E the correct entry would be -108. |
Altitude | The MORA value for the position will appear in this field and will be shown in hundreds of feet. |
Screen Mode
Screen mode allows the user to create a report for a specific latitude and longitude range that will be sent to the screen for viewing.
Field | Description |
Latitude Range - From | Enter the beginning latitude of the range of latitudes that you want to include in the report. |
Latitude Range - To | Enter the ending latitude of the range of latitudes that you want to include in the report. |
Longitude Range - From | Enter the beginning longitude of the range of longitudes that you want to include in the report. |
Longitude Range - To:
| Enter the ending longitude of the range of longitudes that you want to include in the report. |
Hardcopy Mode
Hardcopy mode is the same as Screen mode, except that it allows the user to create a report for a specific latitude and longitude range that will be sent to the user's printer device.
Field | Description |
Latitude Range - From | Enter the beginning latitude of the range of latitudes that you want to include in the report. |
Latitude Range - To | Enter the ending latitude of the range of latitudes that you want to include in the report. |
Longitude Range - From
| Enter the beginning longitude of the range of longitudes that you want to include in the report. |
Longitude Range - To | Enter the ending longitude of the range of longitudes that you want to include in the report. |
Quit Mode
To exit this program, enter <Q> from the command line. You will be asked to enter the menu number of the next program. If you are not sure, pressing <Enter> will return you to the last used menu screen.
Note: The following descriptions represent the typical access and privileges afforded to users designated as Dispatch Managers/Supervisors. Users with dispatcher privileges will have limited access to a subset of the screens presented.
